Our MAXWELL and PINCER brand of Automotive Lubricants will never let your engine go bust….

We have the widest range of Automotive Lubricants from Conventional to Synthetic Motor oils (Monograde & Multigrade Oil) for the new generation, advanced vehicle engine systems to the oldest conventional engines for commercial vehicles still running in some traditional markets of Africa & Asia .

Conventional Single Grade Oil, Multi Grade and Synthetic Motor Oils.

Our MAXWELL &PINCER Lubricants satisfy the lubrication needs of Engines, Gears, Transmissions & other vital parts of Heavy /Medium and Light Commercial Vehicles , Agricultural Tractors , Pump sets, Commercial Vans and Passenger Cars, 2 Wheelers and 3 Wheelers etc.

DIESEL ENGINE OIL SAE 40 & 50


DESCRIPTION

DIESEL ENGINE OIL SAE 40&50 oils are heavy duty diesel engine oils and are blended from highly refined, high viscosity index base stocks and obtain appropriate dosages of detergent-dispersant and antioxidant additives to meet the stated performance standards.

APPLICATION

DIESEL ENGINE OIL SAE 40&50 oils are recommended for all classes of supercharged engine diesel of high speed, high output such as those in:

DIESEL ENGINE OIL SAE 40&50 meets the requirements of hydraulic fluid Type C2 specification of Detroit Diesel Allison, Division of General Motors Corporation, USA.




PERFORMANCE BENEFITS

DIESEL ENGINE OIL SAE 40&50 oils

PERFORMANCE STANDARDS

DIESEL ENGINE OIL SAE 40&50 oils meet the following specifications:

Visometrics SAE 40, SAE 50

TECHNICAL DATA

S.NO CHARACTERISTICS SAE 40 SAE 50
1 Sp.gravity @ 15° C 0.880 0.900
2 K.Viscosity @ 40° C 160 220
3 K.Viscosity @ 100° C 15.5 19
4 Flash point, coc,° C 250 265
5 Viscosity Index 98 97
6 Pour Point,° C -6 -6
7 TBN,mg of KOH/gm 4.5 4.5
Packing: 1 Ltr. 4 Ltr 5 Ltr 20 Ltr 208 Ltr

GEAR OIL SAE 90 & 140


DESCRIPTION

GEAR OIL SAE 90 & 140 oils are extreme pressure hypoid gear oil. This oil is blended from selected base stocks and contain specific additive package to provide extreme pressure, anti wear characteristics

APPLICATION

GEAR OIL SAE 90 & 140 oils are recommended for passenger car, bus and highway truck hypoid, spiral bevel and worm gear axles and also manual transmission for which an extreme pressure gear lubricant of this type is required. GEAR OIL SAE 90 & 140 is specially designed for power transmission units of vehicles operating at sub-zero temperatures

PERFORMANCE BENEFITS

PERFORMANCE STANDARDS

TECHNICAL DATA

Viscometrics SAE 90, SAE 140

S.NO CHARACTERISTICS SAE 90 SAE 140
1 Sp.gravity @ 15° C 0.900 0.915
2 K.Viscosity @ 40° C 220 460
3 K.Viscosity @ 100° C 19 31
4 Flash Point,coc, ° C 268 292
5 Viscosity Index 97 95
6 Pour Point, ° C -6 -6
Packing: 1 Ltr 4 Ltr 5 Ltr 20 Ltr 208 Ltr

2T ENGINE OIL


DESCRIPTION

2T ENGINE OIL is low smoke semi-synthetic two stroke engine oil developed to meet the critical requirements of high performance two Stroke engine manufactured by leading auto makers. It is blended from selected base Stroke and additives to minimize spark plug fouling and pre ignition, prevent rusting, minimize deposit formation and provide protection against seizure, scuffing and wear. It contains diluents for easy mixing with gasoline. 2T PERFECT IS GREEN dyed product.

APPLICATION

2T ENGINE OIL is recommended for lubrication of scooters, auto rickshaws, motorcycles and mopeds operating on two Stroke engines. (The recommended dosage of T supreme is 20 ml of oil per liter of petrol.)


PERFORMANCE BENEFITS




PERFORMANCE STANDARDS

Packing: 1 Ltr 4 Ltr 208 Ltr

TECHNICAL DATA

S.NO CHARACTERISTICS TYPICAL VALUE
1 Sp.gravity @ 15° C 0.88
2 K.Viscosity @ 40° C 96
3 K.Viscosity @ 100° C 11.5
4 Flash point,c, ° C 110
5 Viscosity Index 113
6 Pour Point, °C -20
7 TBN,mg of KOH/gm 2.5

OCEANIC 2T

2T oil is produced from highly refined paraffinic oil and ash less additives, to meet the lubrication requirements of high performance 2 Stroke gasoline engines. It is prediluted to assist easier mixing in all seasons. Oil to fuel ratio should be adjusted according to manufacturer's recommendation.

APPLICATION

2T is highly recommended for all type of outboard engines

PERFORMANCE STANDARDS

API TC-W

Packing: 5 Ltr 208 Ltr

TECHNICAL DATA

S.NO CHARACTERISTICS TYPIAL VALUE
1 Sp.gravity @ 15° C 0.875
2 K.Viscosity @ 40° C 48
3 K.Viscosity @ 100° C 7.4
4 Flash Point,coc,° C 120
5 Pour Point,° C -18

GREASE


DESCRIPTION

Maxwell grease is developed for wheel bearing lubrication of all automotive vehicles, It is a premium quality, lithium soap, multipurpose grease. The grease is manufactured from high viscosity index base oils and select additives with superior performance benefits.

APPLICATION

This grease is specially developed for the lubrication of antifriction bearings of automotive Vehicles to give longer service life. The grease has been evaluated for wheel bearing applications for automotive purposes.

PERFORMANCE BENEFITS



PERFORMANCE STANDARDS

TECHNICAL DATA

S.NO. CHARACTERISTICS TYPICAL VALUE
1 NLGI Consistency 2
2 Range of use, °C -10 to 160
3 Dropping point, °C 190
4 Worked Penetration @25°C, dmm 265-295
5 Appearance Clear and bright
Packing: 250 Gram 500 Gram

BRAKE FLUID (HEAVY DUTY)


DESCRIPTION

HEAVY DUTY BRAKE FLUID is a high quality non mineral fluid based on glycol ethers; especially develop for hydraulic brake system. These fluids are visible with other fluids of similar base and specifications.


PERFORMACE STANDARDS

FMVSS NO.116 DOT-3 SAE J 1703 ISO 4925

PERFORMANCE BENEFITS

TECHNICAL DATA

S.NO CHARACTERISTICS TYPICAL VALUE
1 Sp.gravity @15°C, kg/ 1.03
2 K.viscosity @-40°C,c5t 1150
3 Viscosity @100°C, cSt 1.8
4 Equilibrium reflux boiling point, °C 240>
5 PH value 9
6 Wet boiling point, °C 145
Packing 250 ML 500 ML